Most solid bins share the same skeleton: four upright posts of hollow structural tubing welded to a framed floor, with cross members under the deck for strength. Sheet metal or corrugated panels are then welded to that frame to form the sides and floor.
Sheet-metal bins are the general-purpose unit. Most carry one or two half drop gates, which fold down so workers can reach the contents without unloading the bin.
Corrugated bins use folded steel panels in place of flat sheet. The corrugation adds stiffness, which is why these are the usual choice for heavy or hot parts — the panels resist warping under heat and repeated loading.
A bin's working capacity comes down to two things: the gauge of steel in the panels and the construction of the floor. Heavier gauge and more floor cross members mean a higher safe load and a longer service life. Because capacity is set by construction rather than footprint, two bins with the same outside dimensions can be rated very differently — check the listing, and ask if the margin matters for your load.
Flat bar welded across the bottom of the corner posts creates runners — the gap between floor and bar that a forklift enters. Runners may sit on two opposite sides (two-way entry) or on all four (four-way entry). They hold the bin on the forks over uneven ground, and they let an operator lift and rotate a bin to empty it at a station or tip production scrap into a roll-off or lugger box.
Nearly all solid bins stack. A second style carries a hoop on each of two opposite sides, extending above the top rail — hairpin stacking bins, which nest on those hoops rather than on the rails. Safe stack height depends on how the bin is built and what is in it.
Solid steel bins move parts between stations inside a plant and between facilities for assembly. Automotive is the largest user — fasteners, brake components, pumps, castings, transmission parts, wheels and rims — but foundry, general manufacturing, scrap, agriculture, and warehousing operations run them for the same reason: a container that survives forklift handling for decades costs less over its life than packaging that doesn't.
Used and reconditioned: repaired if needed and fully functional, but not cosmetically like-new — expect scratches, chipped paint and dings. Genuinely new bins are listed separately under New Bins, Baskets and WIP Racking.
Corrugated panels are folded into ridges, which makes them much stiffer than a flat panel of the same gauge, so corrugated bins are the usual choice for heavy, hot or abrasive parts. Flat sheet-metal bins are lighter and have a smooth interior. RDR lists its corrugated steel bins separately, and this guide compares the two.
Yes. Used steel bins, especially corrugated ones, are the standard scrap bin at machines, saws and presses. Scrap Metal Bins: How to Choose covers which type suits turnings, drops and castings.
Stock changes constantly, from small parts bins under 30″ to bins over 80″ long. Each listing gives outside dimensions and, where known, inside height and the number of gates.
Yes. RDR ships across Canada and the US, and freight is quoted separately based on quantity and destination.
Price and availability change with stock, so every item is quoted. Use the enquiry form on any listing — add the quantity you need and your ship-to ZIP or postal code for a freight quote — or call 1-877-558-6667.
